How to Properly Install Your Fire and Water Bowl: Tips and Recommendations

How to Properly Install Your Fire and Water Bowl: Tips and Recommendations

If you've recently purchased a fire and water bowl for your outdoor space, you're likely eager to install it and start enjoying its beautiful features. However, before you do, it's important to ensure that the installation process is done correctly to avoid any potential hazards or problems down the line. In this blog post, we'll go over some tips and recommendations for properly installing your fire and water bowl.

__________

IMPORTANT

Before continuing, it is important to note that it is highly recommended that a local professional / certified installer install your Fire & Water Feature(s). Manufacturer recommendations & procedures are highly followed here at FirePits.Store. Product Installation Manuals, Guides, Specification Sheets & other documents are available in product pages. If you do not see a document, it will be made available upon request.

For questions regarding specific products / orders, please send us an inquiry to info@firepits.store including the product name, gas type configuration, or your order number (if applicable)

__________

If you've recently purchased a fire and water bowl for your outdoor space, you're likely eager to install it and start enjoying its beautiful features. However, before you do, it's important to ensure that the installation process is done correctly to avoid any potential hazards or problems down the line. In this blog post, we'll go over some tips and recommendations for properly installing your fire and water bowl.

  1. Choose a safe location: When selecting a spot for your fire and water bowl, make sure that it is placed in a safe and secure location. Keep in mind that the bowl will be producing flames and water, so it should be away from any flammable materials or structures. Additionally, make sure that the location has proper drainage to prevent water buildup and potential damage to the bowl.

  2. Prepare the site: Before installing the bowl, prepare the site by leveling the ground and clearing away any debris or vegetation. You may also want to consider adding a layer of sand or gravel to create a stable base for the bowl.

  3. Follow the manufacturer's instructions: When installing your fire and water bowl, it's important to follow the manufacturer's instructions carefully. These instructions will vary depending on the specific model and design of your bowl, so make sure to read through them thoroughly before starting the installation process.

  4. Connect the gas or water lines: If your fire and water bowl is fueled by gas or connected to a water supply, make sure that the lines are properly connected and sealed to prevent any leaks. Please consult the product manual to ensure you have the ideal pressure in Inches Per Water Column.

  5. Install the fire and water features: Once the bowl is in place and the lines are connected, it's time to install the fire and water features. Follow the manufacturer's instructions carefully to ensure that these features are installed correctly and functioning properly.

  6. Test the bowl: Before using your fire and water bowl, it's important to test it to make sure that everything is working correctly. Test the flames and water flow to ensure that they are at the desired levels, and make sure that there are no leaks or other issues.

By following these tips and recommendations, you can ensure that your fire and water bowl is installed properly and safely, and that you can enjoy its beautiful features for years to come. If you have any questions or concerns about the installation process, don't hesitate to consult the manufacturer or a professional installer for guidance.

Back to blog